|
|
| Yarn Cone Witch | ||
|
YOU'LL NEED Yarn cone, green and black paint, small styrofoam ball, wiggly eyes, 5 inch square of black stiff fabric (vinyl or starched felt will work), glue, scissors, and a black permanent marker. |
|
| INSTRUCTIONS | ||
| 1. | Paint the top 2 inches of the yarn cone black and the rest light green. | |
| 2. | Paint a small styrofoam ball green to act as a nose. | |
| 3. | When the paint is dry, create the face. Glue on the styrofoam ball and eyes. Use a fine tip black marker to make the mouth. | |
| 4. | Cut a hole in the center of the fabric allowing the hat brim to slide over the top of the cone. | |
| 5. | Slip hat brim over the top of the cone until it sits at the line where black and green meet. | |
|
The Materials Resource Center is a service of the Association for Resource Conservation, Inc. The Association for Resource Conservation, Inc. is a nonprofit 501(c)(3) organization. Copyright © 2004 Association for Resource Conservation, Inc. Disclaimer |